3M vinyl wrapping from £70.00 per turntable

Hundreds of Technics 1200/1210 turntable plinths have been vinyl wrapped by myself here at Just Technics, this is a fantastic way of boosting the cosmetic appearance without breaking the bank.

• Only 3M vehicle vinyl is used, industry standard (no cheap rubbish here!)
• 3M liquid primer applied for optimum adhesive strength
• 5-7 year life external use vehicle grade vinyl

If your turntable plinths are pitted, corroded, chipped, scratched or just heavily worn I would highly recommend removal of the original coating and starting from scratch! , this shall allow a visibly smoother vinyl application and is by far the best option choice you can make! 

Coating removal is available for an additional cost and must be requested upon booking, if not then each plinth shall be prepped and wrapped in the colour/style requested with the plinths remaining in their current cosmetic state.

This is NOT a skin kit which has been pre-cut/designed for a Technics turntable, each plinth wrap is hand cut using surgical blades from a rolled vinyl sheet, platter, on/off switch and 45 adapter vinyl is machine cut. 

Match your chosen choice of vinyl wrap up with either a nice pair of mirror chrome style plaques or original replicated graphics (as pictured to the right) and you'll have an amazing looking pair of Technics turntables!

3M vinyl wrapping of plinth - £70.00 per turntable

Matching 3M vinyl wrapping of platter - £10.00 per turntable

Plinth coating removal - £30.00 per turntable

Replicated turntable graphics - £15.00 per turntable

Clear coating - £15.00 per turntable (required to seal and protect the replicated graphics)

3M vinyl wrapping ONLY available when booking for a service + deep clean!

PLEASE NOTE:

In order to seal any replicated graphics you MUST request clear coating, without any form of coating applied there is a chance the graphics will lift after a period of time (resting palms over plinth or cleaning)