Basic Service + deep clean = SL1200/1210MK2, M3D, MK5, M5G
- Full dismantling of turntable.
- Deep cleaning of turntable plinth.
- Deep cleaning of rubber base.
- Custom made RCA cables + Rean connectors.
- Custom made grounding cable.
- Deep cleaning of Audio PCB.
- Full strip down, deep clean + rebuild of entire tonearm unit.
- Custom made grounding cable.
- Machine polishing of bearing pivots, central support + arm tube.
- Grounding cable bypass and removal (optional)
- Replacement pitch control slider unit.
- Replacement pitch slider PCB potentiometer.
- Deep cleaning of Pitch slider PCB.
- Replacement Pitch slider trim.
- Replacement pitch slider square cloth (if required)
- Replacement pitch slider shading cloth.
- Pitch slider "click" removal (optional)
- Deep cleaning of operation base.
- Replacement speed selection switches.
- machine polishing of strobe tower surround
- Main board solder reflow
- Upgraded diodes plus uprated resistors/capacitors on problem areas.
- Machine polishing of spindle + lubrication.
- Machine polishing of turntable foot surrounds.
- Hand polishing of turntable platter.
£165.00 Single turntable / £330.00 Pair
Please note = the prices stated above are ESTIMATES.
Optional extras:
Colour LED lighting - blue, white, red, green, warm white
Strobe, 33, 45, pitch = £15.00 per turntable
Pop up SMD lighting upgrade = £15.00 per turntable
UK power cable - £8.00 per turntable
Upgraded internal tonearm wiring upgrade - £30.00 per turntable
Replacement Audio PCB - £8.00 per turntable
Basic Service + 3M vinyl wrapping = SL1200/1210MK2, M3D, MK5
- Full dismantling of turntable.
- Deep cleaning of turntable plinth.
- Deep cleaning of rubber base.
- Custom made RCA cables + Rean connectors.
- Custom made grounding cable.
- Deep cleaning of Audio PCB.
- Full strip down, deep clean + rebuild of entire tonearm unit.
- Custom made grounding cable.
- Machine polishing of bearing pivots, central support + arm tube.
- Grounding cable bypass and removal (optional)
- Replacement pitch control slider unit.
- Replacement pitch slider PCB potentiometer.
- Deep cleaning of Pitch slider PCB.
- Replacement Pitch slider trim.
- Replacement pitch slider square cloth (if required)
- Replacement pitch slider shading cloth.
- Pitch slider "click" removal (optional)
- Deep cleaning of operation base.
- Replacement speed selection switches.
- machine polishing of strobe tower surround
- Main board solder reflow
- Upgraded diodes plus uprated resistors/capacitors on problem areas.
- Machine polishing of spindle + lubrication.
- Machine polishing of turntable foot surrounds.
- Hand polishing of turntable platter.
- 3M Vinyl wrapping of turntable plinth
- Replacement pitch trim (black or silver)
- Replace OEM lighting with coloured LEDs of your choice (strobe, 33, 45, pop up, pitch)
£275.00 Single turntable / £550.00 Pair
Please note = the prices stated above are ESTIMATES.
Optional extras:
Matching 3M vinyl wrapping of platter - £10.00 per turntable
Plinth coating removal - £30.00 per turntable
Replicated turntable graphics - £15.00 per turntable
Clear coating - £15.00 per turntable (required to seal and protect the replicated graphics)
Replacement audio PCB - £8.00 per turntable
UK power cable - £8.00 per turntable
Upgraded internal tonearm wiring upgrade - £30.00 per turntable
PLEASE READ!!
We do NOT service or repair anything other than the Technics SL-1200/1210 range of turntables.
Any emails received regarding the repair or servicing of any other product shall be ignored.